Df Side Registration Motor 2 Error 2; Df Slide Motor Error - Kyocera FS-C8600DN Service Manual

Code Contents
8200 DF side registration motor 2
error 2
JAM6910 is detected twice.
8210

DF slide motor error

When initial operation, DF sta-
ple sensor does not turn on
within 3 s.
Causes
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet DF side registration motor 2 and DF main
finisher). PWB (YC15)
DF side registration sensor 2 and DF main
PWB (YC22)
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (1000-sheet DF side registration motor 2 and DF main
finisher). PWB (YC11)
DF side registration sensor 2 and DF main
PWB (YC20)
Defective DF side Replace DF side registration sensor 2.
registration sensor
2.
Defective DF side Replace DF side registration motor 2.
registration motor
2.
Defective DF main Replace the DF main PWB and check for
PWB. correct operation.
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet DF slide motor and DF main PWB (YC12)
finisher). DF staple sensor and DF main PWB (YC22)
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (1000-sheet DF slide motor and DF main PWB (YC10)
finisher). DF staple sensor and DF main PWB (YC20)
Defective DF sta- Replace the DF staple sensor.
ple sensor.
Defective DF slide Replace the DF slide motor.
motor.
Defective DF main Replace the DF main PWB and check for
PWB. correct operation.
1-4-77
Check procedures/
corrective measures
2MN/2N1