Detaching The Transfer Drive Unit - Kyocera FS-C8600DN Service Manual

8. Remove the connector.
9. Remove three screws.
10. Remove the fuser drive unit.

Detaching the transfer drive unit

11. Pull out the transfer belt unit a little (see
page 1-5-34).
12. Release the clamp.
13. Remove the connector.
14. Remove three screws.
15. Remove the transfer drive unit.
Fuser drive unit
Screw
Connector
Screw
Screw
Figure 1-5-105
Transfer drive unit
Screw
Clamp
Connector
Figure 1-5-106
1-5-67
Fuser drive unit
Transfer drive unit
Screws
2MN/2N1