Detaching/Refitting Mp Forwarding/Mp Paper Feed/Mp Separation Pulley - Kyocera FS-C8600DN Service Manual

(4) Detaching and refitting the MP forwarding pulley, MP paper feed pulley and MP
separation pulley
Procedure
1. Remove the MP tray paper feed unit
(see page 1-5-8).
Detaching forwarding pulley and paper feed
pulley
2. Unhook three hooks and then remove
the Du lower guide.
*: Remove the DU lower guide easy by
bending the top base that the hook is
hooking because the hook of the DU
lower guide lacks flexibility.
3. Remove the stop ring A and then slide
the driving joint.
4. Slide the bush A.
5. Remove the stop ring B and then
remove the bush B.
DU lower guide
Hook
Driving joint
Bush A
Bush B
Stop ring B
1-5-12
Hooks
MP tray
paper feed unit
Top base
Figure 1-5-17
Stop ring A
Figure 1-5-18
2MN/2N1