Display Description - Kyocera FS-C8600DN Service Manual

Item No.
U034 4. Change the setting value using the numeric keys.
* : Use the cursor keys to change the decimal digits.
For output example 1, increase the value. For output example 2, decrease the value.
Leading edge
registration
(20 ± 1.0 mm)
5. Press the OK key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value
which is changed adds also the value of [Small] each item and is pulled.
Adjustment: Center line adjustment
1. Press the menu key.
2. Press the OK key to output a test pattern.
3. Press the menu key.
4. Select the item to be adjusted.
[LSU Out Left]
Display
MPT
Cass1
Cass2
Cass3
Cass4
Cass5
Cass6
Cass7
Dup
Correct image
Description
Paper feed from MP tray
Paper feed from cassette 1
Paper feed from cassette 2
Paper feed from optional cassette 3
Paper feed from optional cassette 4
Paper feed from optional cassette 5
Paper feed from optional cassette 6
Paper feed from optional cassette 7
Duplex mode (second)
1-3-34
Description
Output
example 1
Figure 1-3-4
Setting
range
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
2MN/2N1-1
Output
example 2
Initial Change in
setting value per step
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm