Checking The Operation Of The Switches Of The Finisher - Kyocera FS-C8600DN Service Manual

Item No.
U241

Checking the operation of the switches of the finisher

Description
Displays the status of each switches and sensors of 1000-sheet finisher or 4000-sheet finisher.
Purpose
To check the operation of each switches and sensors of the 1000-sheet finisher or 4000-sheet
finisher.
Method
1. Press the OK key.
2. Select the item to be checked.
3. Press the OK key
Finisher
Mail Box
Booklet
Top Mail Box
Punch
Method: [Finisher]
1. Turn each switch or sensor on and off manually to check the status.
When a switch/sensor is detected to be in the ON position, the display for that switch/sensor
will be "1".
Switch 1
Switch 2
Display
Checking the switch and sensor of the document finisher
Checking the switch and sensor of the mailbox
Checking the switch and sensor of the center-folding unit
Checking the motor of the top mailbox
Checking the switch and sensor of the punch unit
Display
0 0 0 0 0 0 0
1
1
1
1
1
1
0 0 0 0 0 0 0
1
1
1
1
1
1
Description
Description
1 First digit: DF front cover switch (DFFCSW)
Second digit: DF eject cover switch (DFECSW)
Third digit: DF top cover switch (DFTCSW)
Fourth digit: DF tray sensor 1 (DFTS1)
Fifth: DF tray sensor 2 (DFTS2)
Sixth: DF tray sensor 3 (DFTS3)
Seventh: DF tray sensor 4 (DFTS4)
1 First digit: DF tray sensor 5 (DFTS5)
Second digit: DF tray upper surface sensor (DFTUSS)
Third digit: DF paper entry sensor (DFPES)
Fourth digit: DF sub eject sensor (DFSES)
Fifth: DF middle eject sensor (DFMES)
Sixth: DF drum sensor (DFDRS)
Seventh: DF slide sensor (DFSLS)
1-3-93
Description
*2
*1
*1
*1
*1
2MN/2N1-1
*1