Item No.
U106
Setting the voltage for the secondary transfer
Description
Sets the control voltage for the secondary transfer depending on each paper type.
Purpose
To change the setting when any density problems, such as too dark or light, occur.
Method
1. Press the OK key.
2. Select the item to be set.
Light/Normal1
Normal2/3
Heavy1
Heavy2
Heavy3
Heavy4
Heavy5
Bias
OHP
Setting: [Light/Normal1]
1. Select the item to be set.
Display
1st
2nd
1st 3/4(Gloss)
2nd 3/4(Gloss)
1st B/W*
2nd B/W*
*: 55 ppm model only.
2. Select the paper width to be set.
3. Change the value using the numeric keys.
Display
Control voltage for the transfer bias on paper with thickness
52 g/m
Control voltage for the transfer bias on paper with thickness
76 g/m
Control voltage for the transfer bias on paper with thickness
106 g/m
Control voltage for the transfer bias on paper with thickness
136 g/m
Control voltage for the transfer bias on paper with thickness
164 g/m
Control voltage for the transfer bias on paper with thickness
221 g/m
Control voltage for the transfer bias on paper with thickness
257 g/m
Transfer bias value
Control voltage for the transfer bias for transparencies
Control voltage for the transfer bias for the first side (full speed)
Control voltage for the transfer bias for the second side (full speed)
Control voltage for the transfer bias for the first side at 3/4 times of
line speed
Control voltage for the transfer bias for the second side at 3/4 times
of line speed
Control voltage for the transfer bias for the first side in black/white
mode
Control voltage for the transfer bias for the second side in black/white
mode
Description
Description
to 64 g/m
and 65 g/m
2
2
to 105 g/m
2
2
to 135 g/m
2
2
to 163 g/m
2
2
to 220 g/m
2
2
to 256 g/m
2
2
to 300 g/m
2
2
Description
1-3-54
to 75 g/m
2
2
2MN/2N1-1