Fan Motors Diagram - Kyocera FS-C8600DN Service Manual

(4) Fan motors
1
8,9
3
4
7
5
22
1. Toner fan motor 1 (TFM1) ..................... Cools the toner container section.
2. Toner fan motor 2 (TFM2) ..................... Cools the toner container section.
3. Developer fan motor 1 (DEVFM1) ........ Cools the developer section.
4. Developer fan motor 2 (DEVFM2) ........ Cools the developer section.
5. Exhaust fan motor 1 (EXFM1) .............. Cools the machine inside.
6. Exhaust fan motor 2 (EXFM2) .............. Cools the machine inside.
7. LSU fan motor (LSUFM) ....................... Cools the laser scanner unit section.
8. Belt fan motor 1 (BLFM1)...................... Cools the transfer belt section.
9. Belt fan motor 2 (BLFM2)...................... Cools the transfer belt section.
10. Fuser edge fan motor 1 (FUEFM1)....... Cools the fuser section (edge).
11. Fuser edge fan motor 2 (FUEFM2)....... Cools the fuser section (edge).
12. Fuser front fan motor (FUFFM)............. Cools the fuser section (front side).
13. Fuser rear fan motor (FURFM) ............. Cools the fuser section (rear side).
14. Eject front fan motor 1 (EFFM1) ........... Cools the eject section (front side).
15. Eject front fan motor 2 (EFFM2) ........... Cools the eject section (front side).
16. Eject rear fan motor (ERFM)................. Cools the eject section (rear side).
23
13
2
Figure 2-2-4 Motors
2-2-8
16
17,18
14
15
19,20
10,11
12
6
2MN/2N1
18 19
21
Machine front
Machine inside
Machine rear
20 17