Df Paddle Motor Error; Df Eject Release Motor Error - Kyocera FS-C8600DN Service Manual

Code Contents
8090

DF paddle motor error

When the DF paddle motor is
driven, DF paddle sensor
does not turn on within 1 s.
8100

DF eject release motor error

When the DF eject release
motor is driven, DF bundle
discharge sensor does not
turn on within 1 s.
Causes
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet DF paddle motor and DF main PWB (YC15)
finisher). DF paddle sensor and DF main PWB
(YC22)
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (1000-sheet DF paddle motor and DF main PWB (YC11)
finisher). DF paddle sensor and DF main PWB
(YC20)
Defective DF pad- Replace the DF paddle sensor.
dle sensor.
Defective DF pad- Replace the DF paddle motor.
dle motor.
Defective DF main Replace the DF main PWB and check for
PWB. correct operation.
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet DF eject release motor and DF main PWB
finisher). (YC12)
DF bundle discharge sensor and DF main
PWB (YC22)
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (1000-sheet DF eject release motor and DF main PWB
finisher). (YC10)
DF bundle discharge sensor and DF main
PWB (YC20)
Defective DF bun- Replace the DF bundle discharge sensor.
dle discharge sen-
sor.
Defective DF eject Replace the DF eject release motor.
release motor.
Defective DF main Replace the DF main PWB and check for
PWB. correct operation.
1-4-72
Check procedures/
corrective measures
2MN/2N1