NEC Univerge SV8100 Features And Specifications Manual page 1403

UNIVERGE SV8100
Related Features
Station Message Detail Recording
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
90-20-01 Traffic Report Data Setup – Call
Traffic Output
90-20-03 Traffic Report Data Setup – All
Line Busy Output
90-20-04 Traffic Report Data Setup –
DTMF Receiver Busy Output
90-20-05 Traffic Report Data Setup – Dial
Tone Detector Busy Output
90-20-06 Traffic Report Data Setup –
Caller ID Receiver Busy Output
Traffic Reports
Description/Comments
Determine whether or not the Call
Traffic Output should be
measured.
All Line Busy Output.
Define the DTMF receiver busy
output details of the traffic report.
Define the dial tone detector busy
output details of the traffic report.
Define the caller ID receiver busy
output details of the traffic report.
Assigned Data
1
0 = Not Measured

1 = Measure
(default = 0)
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
Issue 5.0
Level
2 3




2 - 1377