NEC Univerge SV8100 Features And Specifications Manual page 1485

UNIVERGE SV8100
Program
Program Name
Number
31-02-02 Internal Paging Group
Assignment – Internal All Call
Paging Receiving
31-03-01 Internal Paging Group Settings –
Internal Paging Group Name
31-07-01 Combined Paging Assignments
Operation
To make an Internal Page announcement:
Multiline Terminal/IP Terminal/MH240
1. Press the zone Internal Paging key (Program 15-07 or SC 751: 21 + 0 or 1~9 or 01~64 for zones
(0 or 00 for All Call).
- OR -
Press Speaker or lift the handset.
Dial 701 and the Paging Zone number (0~9 or 00~64).
Dialing 0 or 00 calls All Call Internal Paging.

- OR -
Dial  1 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
Display indicates the Combined Paging as an External Page.

If the Internal Page Zone is busy or if there are no extensions in a page group, the page is announced as an

External Page only.
2. Make announcement.
3. Press Speaker to hang up.
Unicast/Multicast Paging Mode
Description/Comments
Turn Off or On All Call Internal
Paging for each extension. If
allowed, extensions can make
and receive All Call Internal
Paging announcements. If
prevented, extension can make
only All Call Internal Paging
announcements.
Program names for the Internal
Paging Zones.
For each External Paging Group
(1~8 and 0 for All Call), assign a
corresponding Internal Zone for
Combined Paging.
Assigned Data
1
0 = Off
1 = On
(default = 0)

Up to 12 Characters
01 = Group 1
02 = Group 2
:
64 = Group 64
Internal Page Zones: 0,
1~9, 00, 01~64
0~64
(0 = All internal
paging)
(default = 1)
Issue 5.0
Level
2 3


2 - 1459