NEC Univerge SV8100 Features And Specifications Manual page 1422

Issue 5.0
Program
Program Name
Number
14-06-01 Trunk Group Routing – Priority
Order Number
14-07-01 Trunk Access Map Setup – Trunk
Port Number
15-06-01 Trunk Access Map for
Extensions
2 - 1396
Description/Comments
Set the priority order number
(1~4).
Access Map programming may
limit Trunk Group Routing options.
Access Map programming may
limit Trunk Group Routing options.
UNIVERGE SV8100
Assigned Data
1
0 = Not Specify
1~100 : (Trunk Group
Number)
1001~1100 : (1000 +
Route Table Number)
Default:
Route 1, Order

Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified).
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
Trunk Access Maps:
1~200
(default = 1)
Trunk Group Routing
Level
2 3

