NEC Univerge SV8100 Features And Specifications Manual page 1334

Issue 5.0
System Availability
Terminals
None
Required Components
CD-ETIA
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-55-01 Package Network Setup – IP
Address
10-55-03 Package Network Setup – Main/
Add-on
2 - 1308
Description/Comments
Define the IP Address for the
CD-ETIA.
 When the blade is deleted
from the system using
Program 90-05, the
programming for the slot in
10-55 is set back to default.
Use the Main setting to distribute
an IP Address to the blade.
UNIVERGE SV8100
Assigned Data
1
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255255.254

192.0.0.1 ~
223.255.255.254
(default =
172.16.1.100)
0 = Main

1 = Add-on
(default = 1)
SV8100 PoE Gigabit Switch
Level
2 3