NEC Univerge SV8100 Features And Specifications Manual page 1323

UNIVERGE SV8100
Program
Program Name
Number
51-01-02 NetLink System Property Setting
– Primary Candidate Order
51-01-03 NetLink System Property Setting
– Secondary System Flag
51-02-01 NetLink System Individual
Setting – System Name
51-02-02 NetLink System Individual
Setting – Time Zone (Hour)
51-02-03 NetLink System Individual
Setting – Time Zone (Minute)
51-02-04 NetLink System Individual
Setting – Authenticate System
MAC Address
SV8100 NetLink
Description/Comments
When the Primary system is
turned off or disconnect from
network, this value is used to
select a new Primary system.
Smaller number is higher priority.
If this value is the same number,
the System ID (Program 51-01-01)
is referred, and the system which
has the smaller number is
selected as Primary system.
If set to 0, NetLink is dynamically
established based on Node List in
Program 51-03-01. Primary
System is selected in the order the
system wakes up.
If set to 1, the system connects
with Top Priority Primary System.
If Top Priority Primary System is
not found, the system searches
Primary System like this is set to 0.
Enter the name given to each
system.
Determine the time offset from the
Primary system.
(0 = -12, 1 = -11, 2 = -10.... 24 =
+12)
This setting affects Time Display
on MLT (see 51-13-02).
Determine the time offset from the
Primary system.
(0 = -60, 1 = -59, 2 = -58.... 120 =
+60)
This setting affects Time Display
on MLT (see 51-13-02).
Set Program 51-13-03 to 1
(enable). NetLink systems reject
the connection from
unauthenticated system access.
Assigned Data
1
1~50
(default = 30)
0 = Disable
1 = Enable
(default = 0)

Up to 20 characters.
(default not assigned)
0~24
(default = 12)
0~120
(default = 60)
00-00-00-00-00-00~
FF-FF-FF-FF-FF-FF
(default =
00-00-00-00-00-00)
Issue 5.0
Level
2 3





2 - 1297