NEC Univerge SV8100 Features And Specifications Manual page 1352

Issue 5.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-02-17 Analog Trunk Data Setup – Sync.
Ringing
20-15-01 Ring Cycle Setup – Normal
Incoming Call on Trunk
20-15-02 Ring Cycle Setup – PBX, CES
Incoming Call
20-15-04 Ring Cycle Setup – DID/DISA/
VRS
20-15-05 Ring Cycle Setup – DID/DDI
20-15-06 Ring Cycle Setup – Dial-In in the
E&M Tie Line
20-15-07 Ring Cycle Setup – Door Box
Ringing for SLT
20-15-08 Ring Cycle Setup – Virtual
Extension Ring
20-15-09 Ring Cycle Setup – Callback
20-15-10 Ring Cycle Setup – Alarm for
SLT
20-15-11 Ring Cycle Setup –
Message Incoming
Call
2 - 1326
Description/Comments
Enable/Disable per trunk.
Define the ring cycle for Normal
Incoming trunk calls.
Define the ring cycle for PBX and
CES incoming trunk calls.
Define the ring cycle for DID/DISA/
VRS incoming calls.
Define the ring cycle for DID/DDI
incoming calls.
Define the ring cycle for Dial IN
and E&M Tie line calls.
Define the ringing cycle for Door
Box Ringing for SLT terminals.
Define the ringing cycle for Virtual
Extensions.
Define the ringing cycle for
callbacks.
Define the ring cycle for Alarm for
SLT terminals.
VRS Waiting
Define the ring cycle for incoming
VRS Waiting messages.
UNIVERGE SV8100
Assigned Data
1
0 = Disable

1 = Enable
(default = 1)
Ringing Cycle = 1~13
(default = 2)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 12)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 11)
Ringing Cycle = 1~13
(default = 5)
Ringing Cycle = 1~13
(default = 6)
Synchronous Ringing
Level
2 3









