NEC Univerge SV8100 Features And Specifications Manual page 1459

UNIVERGE SV8100
The Networking feature (AMIS/PlusNet) is NOT supported when using the "Lite" version of

UM8000.
Caller ID Return Call may require ARS programming to properly route outgoing calls.

Updating the system time also updates the UM8000 Mail time.

When setting up hunt group priorities in 16-02-01 the VM ports must be assigned as port

1 = priority 1, port 2 = priority 2 and so on. Failure to do this causes the VM to answer but
no audio is heard.
The Live Record feature is supported only for External CO/Trunk calls. Internal/Intercom

calls are not supported.
The following databases can be migrated to the UM8000:

OS/2 based EliteMail CTI

DOS based EliteMail Q51731 or higher

Linux based EliteMail CTI LX

Linux based EliteMail CTI LX Lite

Voice messages forwarded to an email address using email integration can be set to be

automatically deleted, saved as new or saved as old, in a user's mailbox.
When a mailbox is set to delete or save as old voice messages forwarded to an email

address using email integration, the following features are not supported: Pager
Notification, Message Waiting Indication.
The UM8000 Mail can be configured for 4, 8, 12, or 16 ports.

Email integration refers to forwarding voice messages to an email server and does not

apply to the client applications ViewMail®, VMM, VMG and VML.
The operating system is Linux.

Extension numbers cannot start with 0 or 9.

VM8000 InMail and UM8000 Mail cannot be used at the same time in the same system.

Ring Group calls do not follow extension call forwarding to voice mail.

Live Record does not work for monitored calls.

Caller ID information is passed from the voice mail to an extension for pre-answer display

on an unscreened transfer from voice mail.
Off-premise notification and external extensions require access to outside lines.

To have the Voice Mail Automated Attendant answer a trunk, program the trunk as a DIL to

the Voice Mail pilot.
When the voice mail places a call on hold, it uses Group Hold. Any line appearances for the

trunk shows the hold flash rate, however, users cannot pick up these calls (a busy signal is
heard).
UM8000 Mail
Issue 5.0
2 - 1433