NEC Univerge SV8100 Features And Specifications Manual page 209

UNIVERGE SV8100
Program
Program Name
Number
11-11-55 Service Code Setup (for Setup/
Entry Operation) – Call Forward
Busy No Answer Destination (No
Split)
11-11-58 Service Code Setup (for Setup/
Entry Operation) – Call forward
with Personal Greeting
11-12-01 Service Code Setup (for Service
Access) – Bypass Call
11-16-06 Single Digit Service Code Setup
– DND/Call Forward Override
Bypass
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
Call Forwarding
Description/Comments
Set or Cancel the call forward
busy or no answer destination with
no split.
Set the service code for setting
call forwarding with Personal
Greeting.
Customize the Service Codes
which are used for bypass calls.
Customize the one-digit Service
Codes used when a busy or ring
back signal is heard.
Assign functions to multiline
terminal line keys.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension ability
to receive a second call from a
DID, DISA, DIL, or tie line caller.

With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Turn Off or On an extension ability
to have calls queued if a call rings
the extension when it is busy.
Assigned Data
1
MLT, SLT
(default = 793)
MLT, SLT
(default = 713)
MLT, SLT
(default = 707)
(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 12.0
Level
2 3






2 - 179