NEC Univerge SV8100 Features And Specifications Manual page 246

Issue 12.0
Program
Program Name
Number
21-01-03 System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
Operation
The call must be set up for about 10 seconds before it can be Monitored. Listen for busy/ring or busy
tone.
To Call Monitor after calling a busy extension:
1. Call a busy extension.
2. Press the Barge-In key (Program 15-07 or SC 751: 34).
- OR -
The following steps are not available for DISA or Tie Line trunks.
1. Dial the extension number of the busy internal party.
2. Dial the single digit service code or the service code 710.
To Call Monitor without first calling the busy extension:
1. Press Speaker or lift handset.
2. Dial 710 or press the Barge-In key (Program 15-07 or SC 751: 34).
3. Dial a busy extension.

If Monitoring is not possible:
the extension user hears a warning tone.

the DISA user is rerouted to the defined ring group.

the Tie Line user hears a busy tone.

To Call Monitor using Coaching Ability:
1. Call a busy extension.
2. Press the Barge-In key (Program 15-07 or SC 751:34).
2 - 216
Description/Comments
Program the time an extension
must wait before using the
Barge-In feature can be used on a
call (this time expires before a call
is put in a talk state). This time
also affects Voice Over.
UNIVERGE SV8100
Assigned Data
1
0~64800 (seconds)
(default = 5)
Call Monitoring
Level
2 3
