Central Office Calls, Placing - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
With Version 7000 or higher software, the Side Tone Auto Setup feature has been added.
Description
The system provides flexibility in the way each extension user can place outgoing trunk calls. This lets
you customize the call placing options to meet site requirements and each individual's needs. To place
a call the user can:
Press Line Keys

Press a Trunk Group Key

Press a Trunk Group Routing (dial 9) Key

Dial a code for a specific trunk (

Dial a code for a Trunk Group (704 + group number)

Dial a code for Trunk Group Routing or ARS (9)

Dial an Alternate Trunk Route Access Code (which you must define)

Press or Use a Speed Dial bin

There are 200 available trunks.
Trunk Port Disable
The system provides a service code (default: 645) which can be used by an extension user to block a
trunk for outgoing calls. The user which busied out the trunk still has access to it. All other users are
blocked from seizing it to place an outgoing call. The trunk, however, can still be answered by any user
programmed with the trunk access.
Sidetone Volume Setup
Allows the system programming for the multiline terminal side tone volume. There are two levels, based
on whether the connected trunk is a digital trunk or analog trunk.
Side Tone Auto Setup
Per each analog trunk (or all analog trunks) the most suitable Codec Filter setting for Program 81-07 and
Program 81-17 can be automatically adjusted using Programs 90-68-01 and 90-68-02.

Central Office Calls, Placing

Central Office Calls, Placing
9 + the trunk number)
#
Issue 12.0
2 - 275