Front Fork Parts Inspection - Suzuki RMX450Z Service Manual

2B-11 Front Suspension:
24) Loosen and remove the fork cap bolt (10) (sub-tank)
from the outer tube and slowly slide down the outer
tube.
Special tool
(C): 09941–53630 (Front fork cap socket
wrench (50 mm))
25) Pour the specified amount of fork oil into the outer
tube.
: Fork Oil (FORK OIL SS-19 or equivalent)
Front fork oil capacity
320 ml (10.8/11.3 US/lmp oz)
26) Raise the outer tube and temporarily tighten the fork
cap bolt (sub-tank) with the special tool.
Special tool
(C): 09941–53630 (Front fork cap socket
wrench (50 mm))
27) After installing the front fork, tighten the fork cap bolt
to the specified torque with the special tool. Refer to
"Front Fork Removal and Installation" (Page 2B-2).
Special tool
: 09941–53630 (Front fork cap socket
wrench (50 mm))
Tightening torque
Fork cap bolt: 34 N·m (3.4 kgf-m, 24.5 lbf-ft)

Front Fork Parts Inspection

Refer to "Front Fork Disassembly" (Page 2B-3) and
"Front Fork Assembly" (Page 2B-7).
Center Bolt
Inspect the adjuster rod of the center bolt for damage. If
it is damaged, replace it with a new one.
10
Compression Damper Unit
Inspect the compression damper unit for damage. If it is
damaged, replace it with a new one.
IA02J1220046-01
(C)
IA02J1220047-01
CAUTION
!
Disassembling the compression damper unit
can lead to trouble. Do not disassemble the
compression damper unit.
BA02J22206005
IA02J1220048-01
IA02J1220049-01