Image Compression; Fax Defaults - Fuji Xerox DocuPrint M218 fw User Manual

• Image Compression

Purpose:
To specify the image compression level.
Values:
Higher
Normal*
Lower
• Max E-Mail Size
Purpose:
To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K
bytes. The default is 2048 K bytes.

Fax Defaults

Use the Fax Defaults menus to configure a variety of fax features.
NOTE:
• The Fax service cannot be used unless you set up a region code under Region. If Region is not set up, a
message Set The Region Code appears on the LCD panel.
• Values marked by an asterisk (*) are the factory default menu settings.
• Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Values:
Standard*
Fine
Super Fine
Ultra Fine
NOTE:
• Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving device.
• Document Type
Purpose:
To select the default document type.
Values:
Text*
Photo
361 Using the Operator Panel Menus and Keypad
Sets the image compression level to Higher.
Sets the image compression level to Normal.
Sets the image compression level to Lower.
Suitable for documents with normal sized characters.
Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Suitable for documents containing extremely fine detail. The Super
Fine mode is enabled only if the remote machine also supports the
super fine resolution. See the notes below.
Suitable for documents containing photographic images.
Suitable for documents with text.
Suitable for documents with photos.