Fax Defaults - Fuji Xerox ApeosPort-V C5580 Administrator's Manual

5 Tools
Transmission Screen
Set whether or not to display transmission status during transmission.
Display Fax Line Selection
Set whether or not to enable you to select a fax line (port) from the drop-down menu on the
[Fax / Internet Fax] screen.
Note
 Display Fax Line Selection
Specify whether or not to display the fax lines on the drop-down menu.
 Fax Line 1 - Name to Fax Line 3 - Name
Specify the names for each fax line to be displayed on the drop-down menu.

Fax Defaults

You can set the default settings of the Fax services. When the machine is turned on, or the
machine exits from the Power Saver mode, or when the <Clear All> button is pressed, the
machine resets to the default values specified under this menu. By setting frequently used
features and values as the defaults, you can simplify operations.
5
For more information on each setting item, refer to "4 Fax" in the User Guide.
Resolution
Set the default value for [Resolution] in the [Fax/Internet Fax] screen.
Original Type
Set the default value for [Original Type] in the [Fax/Internet Fax] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] in the [Fax/Internet Fax] screen.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Layout Adjustment] screen.
Note
Skip Blank Pages
Set the default value for [2 Sided Scanning] in the [Fax/Internet Fax] and [Layout
Adjustment] screens to [2 Sided (First Page 1 Sided)].
Note
Starting Rate
Set the default value for [Starting Rate] in the [Fax/Internet Fax Options] screen.
Delay Start - Specific Time
Set the default value for [Specific Time] of [Priority Send/Delay Start] in the [Fax/Internet
Fax Options] screen when [Specific Time] is selected for [Delay Start].
234
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• The items displayed on the screen depend on the options installed on the machine.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This feature is for service representative use. For more information, contact our Customer Support
Center.