Network Interface Radio Settings Page - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Network Interface Radio Settings Page

The Setting page provides detailed parameters settings for the interface you need

to configure. There are some overlap in these parameters with the Easy Setup

Figure 39 - Interface Settings Page

Table 20 - Radio0-802.11n 2 GHz and Radio1-802.11n 5 GHz Settings Description

Operating Mode

This value indicates whether or not the radio supports multiple protocols, as in 802.11b,

802.11g or 802.11n for instance.

A radio in mixed mode supports clients from multiple clients at the same time.

Enable Radio

This is where you enable the radios. In the easy Setup page, you can set some parameters,

but you need to go to this page to enable the radio.

Network>Network Interface>Radio0-802.11n 2 GHz (or Radio0-802.11n 5 GHz) >Settings

to enable a radio.

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

Stratix 5100 Device Manager Parameter Definitions