Network Interface: Gigabitethernet Settings - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Stratix 5100 Device Manager Parameter Definitions

Network Interface: GigabitEthernet Settings

You can use the settings page to define physical settings and AP authentication.

Table 17 - GigabitEthernet Parameter Descriptions

Physical Settings

Enable Ethernet

Current Status

Requested Duplex

Requested Speed

AP Authentication

Authentication Methods Profile

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

Duplex setting for the Ethernet interface; Auto, Half, and Full.

Important: Do not modify Requested Duplex while using inline

power. Changing these settings while using inline power can

cause the device to reboot.

Important: Do not modify Requested Speed while using inline

power. Changing these settings while using inline power can

cause the device to reboot.

Choose a credential or click Define Credentials to go to AP

Authentication where you can define the credentials you need.

Choose a profile or click Authentication Methods Profile to go to

AP Authentication where you can define the profiles you need.