Configuring Advanced Eap Parameters - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Configure an Access Point as a Local Authenticator

Configuring Advanced EAP Parameters

Now that the RADIUS server is added, you can configure advanced EAP

parameters. These steps are optional and can be skipped to expedite setup.

1. Click Security.

2. From the Security menu, click Advanced Security.

3. Click the Timers tab to go to the page where EAP authentication is

4. Choose one of the options that enable reauthentication.

These interval options set how often EAP authentication is reattempted.

You can enter your own interval or use the one provided by the RADIUS

5. In the TKIP MIC Failure Holdoff Time text field, enter the amount of

time the access point needs to wait for wireless clients to respond to EAP

authentication requests.

6. Click Apply.

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014