Snmp Page - Allen-Bradley Stratix 5100 User Manual

SNMP Page

SNMP is an application-layer protocol that supports message-oriented
communication between SNMP management stations and agents. This page
configures the access point to work with your network administrator's Simple
Network Management Protocol (SNMP) station.
In addition to enabling SNMP, you must enter an SNMP community. The
SNMP community string is used like a username and is for authentication,
privacy, and authorization services within SNMP. When you enter an SNMP
Community name on the Express Setup page, the community associates using
read-only or read/write capabilities.
Figure 72 - SNMP Page
Table 57 - SNMP Page Parameter Description
Parameter Description
Simple Network Management This setting must be enabled to use SNMP with the device. In addition to enabling
Protocol (SNMP) SNMP, you must enter an SNMP community string.
System Description The system's device type and current version of firmware as listed at the bottom of
the page.
System Name (optional) The name of the device. The name in this field is reported to your SNMP's
management station as the name of the device when you use SNMP to communicate
with the device.
System Location (optional) The physical location of the device, such as a building name or room.
System Contact (optional) The name of the system administrator responsible for the device.
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Stratix 5100 Device Manager Parameter Definitions Chapter 4
155