Logging Into And Exiting A Privilege Level; Controlling Access Point Access With Radius - Allen-Bradley Stratix 5100 User Manual

Chapter 6 Administering the WAP Access
Controlling Access Point
Access with RADIUS
208
show running-config
or
show privilege
6. (Optional) Save your entries in the configuration file.
copy running-config startup-config
When you set a command to a privilege level, all commands whose syntax is a
subset of that command are also set to that level. For example, if you set the
command to level 15, the
ip route
commands are automatically set to privilege level 15 unless you set them
individually to different levels.
To return to the default privilege for a given command, use the
mode level level command
This example shows how to set the
and define
SecretPswd14
commands:
AP(config)# privilege exec level 14 configure
AP(config)# enable password level 14 SecretPswd14

Logging Into and Exiting a Privilege Level

Beginning in privileged EXEC mode, follow these steps to log in to a specified
privilege level and to exit to a specified privilege level:
1. Log in to a specified privilege level.
For level, the range is 0...15.
enable level
2. Exit to a specified privilege level.
For level, the range is 0...15.
disable level
This section describes how to control administrator access to the wireless device
by using Remote Authentication Dial-In User Service (RADIUS). For complete
instructions on configuring the wireless device to support RADIUS, see
Configuring RADIUS and TACACS+ Servers on page
RADIUS provides detailed accounting information and flexible administrative
control over authentication and authorization processes. RADIUS is facilitated
through AAA and can be enabled only through AAA commands.
For complete syntax and usage information for the commands used in this
chapter, see the Cisco IOS Security Command Reference for Release
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
commands and
show
global configuration command.
command to privilege level 14
configure
as the password users must enter to use level 14
show
show ip
no privilege
407.
12.3.