Logging Into The Access Point; Using Online Help; Configure The Basic Settings For An Access Point - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Logging into the Access Point

Configure the Basic Settings

for an Access Point

A user can login to the access point by using one of the following methods:

• graphical user interface (GUI)

• Telnet (if the AP is configured with an IP address)

• console port

For information on logging into the access point through the:

Accessing CLI on page

• Console port, see

Click the help icon at the top of any page in the web browser

interface to display online help. Click the printer icon to print

the page you are on.

The help page appears in a new browser page, use the select a topic pull-down

menu to display the help index or instructions for common configuration tasks,

such as configuring VLANs.

After you determine or assign the access point IP address, you can browse to the

access point Express Setup page and perform the initial configuration.

1. Open your Internet browser.

2. Type the WAP address in the browser address line and press Enter.

An Enter Network Password screen appears.

3. Press Tab to bypass the Username field and advance to the Password field.

4. Enter the case-sensitive password: wirelessap.

5. Press Enter.

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

Stratix 5100 Device Manager Configuration Startup

Connect to the Stratix 5100 WAP Access Point Locally