Using Debug Messages - Allen-Bradley Stratix 5100 User Manual

Using Debug Messages

In privileged exec mode, enter this command to control the display of debug
messages for the local authenticator:
AP# debug radius local-server { client | eapfast |
error | packets}
Use the command options to display this debug information:
• Use the
client
authentications.
• Use the
eapfast
authentication. Use the sub-options to select specific debugging
information:
–
encryption
received and transmitted packets.
–
— information on all EAP-FAST events.
events
–
—information on events related to PACs, such as PAC generation
pac
and verification.
–
— The packets sent to and received from EAP-FAST clients.
pkts
• Use the
option to display error messages related to the local
error
authenticator.
• Use the
packets
packets sent and received.
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Configure an Access Point as a Local Authenticator
option to display error messages related to failed client
option to display error messages related to EAP-FAST
— information on the encryption and decryption of
option to turn on display of the content of RADIUS
Chapter 10
341