Configuring The Authentication Cache And Profile - Allen-Bradley Stratix 5100 User Manual

Configuring the
Authentication Cache and
Profile
• For password, specify the password the user must enter to gain access to the
wireless device. The password must be from 1...25 characters, can contain
embedded spaces, and must be the last option specified in the
command.
TIP Characters TAB, ?, $, +, and [ are invalid characters for passwords.
username name [privilege level] {password
encryption-type password}
7. Return to privileged EXEC mode.
end
8. Verify your entries.
show running-config
9. (Optional) Save your entries in the configuration file.
copy running-config startup-config
To disable AAA, use the
To disable authorization, use the
global configuration command.
exec} method1
The authentication cache and profile feature allows the access point to cache the
authentication/authorization responses for a user so that subsequent
authentication/authorization requests don't need to be sent to the AAA server.
On the access point, this feature is supported only for Admin authentication.
TIP
The following commands that support this feature are in the Cisco IOS Release
12.3(7) and later:
cache expiry
cache authorization profile
cache authentication profile
aaa cache profile
For a list of Cisco IOS commands CLI, see the
for Cisco Aironet Access Points and Bridges
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Administering the WAP Access
global configuration command.
no aaa new-model
no aaa authorization {network |
Cisco IOS Command Reference
Guide.
Chapter 6
username
221