Dns Page - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Stratix 5100 Device Manager Parameter Definitions

DNS Page

This page is where you decide if you want the DNS (Domain Name System)

enabled or disabled. The DNS is a named server that lets you connect to a device

without knowing its IP address but can access by using a given name. So after you

give the WAP a name and you assign the DNS server to use, you need to make

sure that the DNS Server has a record of the WAP. For more information about

using a DNS, see

Enabling HTTPS for Secure Browsing on page

Figure 63 - DNS Page

Table 47 - DNS Page Parameter Descriptions

Domain Name System (DNS)

Domain Name (optional)

Name Server IP Addresses

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

Choose if you want DNS enabled or disabled. If you enable DNS, at least one

domain name server needs to be entered.

If your network uses a Domain Name System (DNS), enter the name of your

network's IP domain. Your entry can look like mycompany.com.

Enter the IP addresses of up to three domain name servers on your network.