Displaying Spanning-Tree Status - Allen-Bradley Stratix 5100 User Manual

Chapter 9 Configuring Spanning Tree Protocol
Displaying Spanning-tree
Status
318
To display the spanning-tree status, use one or more of the privileged EXEC
commands in this table.
Table 91 - Commands for Displaying Spanning-tree Status
Command
show spanning-tree
show spanning-tree blocked-ports
show spanning-tree bridge
show spanning-tree active
show spanning-tree root
show spanning-tree interface interface-id
show spanning-tree summary [totals]
For information about other keywords for the show spanning-tree privileged
EXEC command, see publication
Aironet Access Points and
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Description
Information on your network' s spanning tree.
List of blocked ports on this bridge.
Status and configuration of this bridge.
Spanning-tree information on only active interfaces.
Summary of information on the spanning-tree root.
Spanning-tree information for the specified interface.
Summary of port states or the total lines of the STP state section appear.
Cisco IOS Command Reference for Cisco
Bridges.