Add The Radius Server - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Configure an Access Point as a Local Authenticator

If you click to enable the use of the

defaults, click the Define Defaults

link to go to the Server Manager page.

This is where you can configure the

RADIUS server.

10. Click Apply.

Add the RADIUS Server

Now that the SSID is configured, you can add the RADIUS or TACACS+

server. Complete these steps to add the RADIUS server.

1. Click Security.

2. From the Security menu, click Server Manager.

3. From the Current Server List pull-

down menu, select the server to be

used for MAC authentication.

If you need to create a new server,

4Step 4. Otherwise,

4. Select <NEW> from the Current

Server List.

5. Use the pull-down menu to select RADIUS server as the server type.

6. Enter the server host name or IP address in the Server text field.

7. In the Shared Secret text field, enter the shared secret used by your

specified server that matches the one on the device.

8. (Optional) Enter the port number your server uses for authentication in

the Authentication Port parameter.

For example, the port setting for the Cisco RADIUS server (Access

Control Server [ACS]) is 1645, and the port setting for many RADIUS

servers is 1812.

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014