Displaying Monitor Mode Statistics - Allen-Bradley Stratix 5100 User Manual

Chapter 13 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
404

Displaying Monitor Mode Statistics

Use this global configuration command to display statistics on captured frames.
show wlccp ap rm monitor statistics
This example shows output from the command:
ap# show wlccp ap rm monitor statistics
Dot11Radio 0
====================
WLAN Monitoring
Endpoint IP address
Endpoint port
Frame Truncation Length
Dot11Radio 1
====================
WLAN Monitoring
WLAN Monitor Statistics
==========================
Total No. of frames rx by DOT11 driver
Total No. of Dot11 no buffers
Total No. of Frames Q Failed
Current No. of frames in SCAN Q
Total No. of frames captured
Total No. of data frames captured
Total No. of control frames captured
Total No. of Mgmt frames captured
Total No. of CRC errored frames captured: 0
Total No. of captured frames forwarded
Total No. of captured frames forward failed : 0
To clear the monitor mode statistics, use this command.
clear wlccp ap rm statistics
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
: Enabled
: 10.91.107.19
: 2000
: 535 bytes
: Disabled
: 58475
: 20287
: 23179
: 361
: 0
: 0
: 0
: 425
: 1957