Creating And Enabling Mac Authentication; By Using Radius Server - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Creating and Enabling MAC

Authentication by Using

RADIUS Server

You must first configure the SSID. Complete the following steps to configure the

1. Click Security.

2. From the Security menu, click SSID Manager.

3. In the Current SSID list, select the SSID for the MAC authentication.

If you need to create a new SSID, continue to

4. Select <NEW> from the Current SSID List.

5. Provide the SSID name in the SSID text field.

6. At the VLAN list, select the VLAN to be used for this SSID.

Select <NONE> if VLANs are not enabled.

7. Under Authentication Methods Accepted, select the authentication type

to use on this SSID.

8. Use the pull-down menu to choose MAC Authentication, or you can also

select MAC and EAP authentication or MAC or EAP authentication.

9. Determine how you are going to use specific RADIUS servers on this

SSID by using the EAP and MAC Authentication Server sections.

You can choose to use the defaults or customize the priority by using the

pull-down menu.

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

Configure an Access Point as a Local Authenticator

4. Otherwise, skip to