Enable The Radio On The Network - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Enable the Radio on the

Table 6 - Radio Configuration Settings

Aironet Extensions

10. Click Apply to save your settings.

For additional radio configuration about the parameters, use these links:

Easy Setup Network Configuration Page on page 80

Network Interface Summary Page on page 87

In addition to setting the parameters on the Easy Setup page, you must go to the

radio settings page to enable the radio.

1. From the top menu, click Network.

The Network Summary page appears.

2. Click Network Interface.

3. Click Summary.

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

Stratix 5100 Device Manager Configuration Startup

Choose Enable if there are only Rockwell Automation WAPs or Cisco Aironet devices

on your wireless LAN and the unit is operating as an access point or workgroup

bridge or if the unit is operating as a repeater.

Channel 1-24xx

Least Congested

When you choose Least congested, the WAP makes the determination on it's own

which channel is best.