Regulatory Domains; Configuring The Access Point; Management Options - Allen-Bradley Stratix 5100 User Manual

Management Options

Regulatory Domains

The Stratix 5100 supports the following regulatory domains:
• 1783-WAPAK9 (North America)
• 1783-WAPZK9 (Australia/New Zealand)
• 1783-WAPEK9 (European Union)
• 1783-WAPCK9 (China)

Configuring the Access Point

You can configure and monitor the wireless device by using the following:
• Command-line interface (CLI),
• Stratix 5100 WAP Device Manager, browser-based management system:
web based or Simple Network Management Protocol (SNMP).
You can use the wireless device management system through the following
interfaces:
• A web browser interface, that you use through a web browser.
See Stratix 5100 Device Manager Configuration Startup on page 51
detailed description of the web browser interface.
• The Cisco IOS command-line interface (CLI), that you use through a
console port or Telnet session.
• Use the
interface dot11radio
place the wireless device into the radio configuration mode. For mor
information on CLI, see
Command-Line Interface on page
• Simple Network Management Protocol (SNMP).
page 507 explains how to configure the wireless device for SNMP
management.
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Getting Started with the Stratix 5100 WAP
global configuration command to
Configure the Stratix 5100 WAP Using the
175.
Configuring SNMP on
Chapter 1
for a
23