Ip Filters Page - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Stratix 5100 Device Manager Parameter Definitions

IP Filters Page

Use this page to create or edit protocol filters. IP filters prevent or allow the use of

IP address(es), IP protocols, and TCP/UDP ports through the access point's

Ethernet and radio ports. You can create a filter that passes traffic to all addresses

except those you specify, or you can create a filter that blocks traffic to all

addresses except those you specify. You can create filters that contain elements of

one, two, or all three IP filtering methods. You can apply the filters you create to

either or both the Ethernet and radio ports and to either or both incoming and

outgoing packets.

Figure 66 - IP Filters Page

Table 50 - IP Filters Page Parameter Descriptions

Create/Edit Filter Name

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

If you are creating a new filter, make sure to select <NEW> (the default) from the

Create/Edit Filter drop-down menu.

To edit an existing filter, select the filter name from the Create/Edit Filter drop-

Enter a descriptive name for the new filter.