Configuration Options Page - Allen-Bradley Stratix 5100 User Manual

Configuration Options Page

These settings let you decide how you want to be notified of the different events
that are logged and the level of logging that is to take place.
Figure 84 - Configuration Options Page
Table 70 - Event Log Configuration Parameter Descriptions
Parameter
Disposition of Events (by Severity Level)
Display on Event Log
Notify via SNMP/Syslog Trap
Record for SNMP/Syslog History Table
Display on Telnet/SSH Monitor
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Stratix 5100 Device Manager Parameter Definitions
Description
When a severity level is selected, all higher-priority severity levels are also
selected.
Determine for each severity level whether you want the event displayed
on the event log by placing a check mark in the check box. Events
displayed on the event log are available on the event log page.
Determine for each severity level whether you want to be notified by an
SNMP/Syslog trap when the event occurs. The notification occurs when a
check mark appears in the check box.
Determine for each severity level whether you want to record the event in
the SNMP/Syslog history table. The event is recorded when a check mark
appears in the check box.
Determine for each severity level whether you want to display the event
on the Telnet/SSH monitor. The event displays on the monitor when a
check mark appears in the check box.
Chapter 4
173