Privileged Exec Access And Network Services - Allen-Bradley Stratix 5100 User Manual

• For list-name, specify the list created with the
authentication login
login authentication {default | list-name}
9. Return to privileged EXEC mode.
end
10. Verify your entries.
show running-config
11. (Optional) Save your entries in the configuration file.
copy running-config startup-config
• To disable AAA, use the
command.
• To disable AAA authentication, use the
login {default | list-name} method1 [method2...]
global configuration command.
• To either disable TACACS+ authentication for login or to return to the
default value, use the
line configuration command.
list-name}
Configuring TACACS+ Authorization for Privileged EXEC Access and
Network Services
AAA authorization limits the services available to an administrator. When AAA
authorization is enabled, the access point uses information retrieved from the
administrator's profile, that is either in the local user database or on the security
server, to configure the administrator's session. The administrator is granted
access to a requested service only if the information in the administrator profile
allows it.
You can use the
aaa authorization
+ keyword to set parameters that restrict an administrator's network
the
tacacs
access to privileged EXEC mode.
The
aaa authorization exec tacacs+ local
authorization parameters:
• Use TACACS+ for privileged EXEC access authorization if
authentication was performed by using TACACS+.
• Use the local database if authentication was not performed by using
TACACS+.
Authorization is bypassed for authenticated administrators who log in through
TIP
CLI even if authorization has been configured.
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Configuring RADIUS and TACACS+ Servers
command.
no aaa new-model
no aaa authentication
no login authentication {default |
global configuration command with
Chapter 14
aaa
global configuration
command sets these
437