Wep Key Restrictions - Allen-Bradley Stratix 5100 User Manual

Chapter 11 Configuring Cipher Suites and WEP
346
[ 0 | 7 ]
[transmit-key]
4. Return to privileged EXEC mode.
end
5. (Optional) Save your entries in the configuration file.
copy running-config startup-config
This example shows how to create a 128-bit WEP key in slot 3 for VLAN 22 and
sets the key as the transmit key:
ap5100# configure terminal
ap5100(config)# interface dot11radio 0
ap5100(config-if)# encryption vlan 22 key 3 size
128 12345678901234567890123456 transmit-key
ap5100(config-if)# end

WEP Key Restrictions

This table lists WEP key restrictions based on your security configuration.
Table 92 - WEP Key Restrictions
Security Configuration
CCKM or WPA authenticated key management
LEAP or EAP authentication
Cipher suite with 40-bit WEP
Cipher suite with 128-bit WEP
Cipher suite with TKIP
Cipher suite with TKIP and 40-bit WEP or 128-bit WEP
Static WEP with MIC
Broadcast key rotation
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
WEP Key Restriction
Cannot configure a WEP key in key slot 1
Cannot configure a WEP key in key slot 4
Cannot configure a 128-bit key
Cannot configure a 40-bit key
Cannot configure any WEP keys
Cannot configure a WEP key in key slot 1 and 4
Access point and client devices must use the same WEP key
as the transmit key, and the key must be in the same key slot
on both access point and clients.
Keys in slots 2 and 3 are overwritten by rotating broadcast
keys Client devices by using static WEP cannot use the access
point when you enable broadcast key rotation. Broadcast
key rotation is supported only when using key management
(such as dynamic WEP (802.1x), WPA with EAP, or preshared
key).