Securing The Access Point; Securing The Access Point To The Mounting Plate - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Install the Stratix 5100 Wireless Access Point/Workgroup Bridge

Securing the Access Point

There are two ways to secure your access point:

• Attach it to an immovable object with a security cable.

• Lock it to the mounting plate with a padlock.

Use the security hasp on the adapter cable access cover and a padlock (that you

provide) to secure your access point to the mounting plate.

Figure 11 - Security Hasp

Compatible padlocks are Master Lock models 120T or 121T. The cable access

cover on the mounting bracket covers the cable bay area (including the power

port, Ethernet port, console port, and the mode button) to prevent the

installation or removal of the cables or the activation of the mode button.

Follow these instructions to install the padlock:

1. With the access point installed on the mounting bracket, insert a padlock

into the security hasp.

Note If your access point is mounted to a hard ceiling, the clearance between

the mounting bracket and the ceiling is small. Work slowly by using both

hands to position and secure the lock into the mounting bracket hasp.

2. Rotate the lock clockwise and align the bail with the lock body.

3. Grasp the lock and push it into the bail to lock the lock.

Figure 12 - Attach the Pad Lock

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014