Debugging Radio Functions - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Configuring Radio Settings

Debugging Radio Functions

debug dot11 privileged EXEC

radio functions. Use the no form of this command to stop the debug operation.

The command syntax is:

[no] debug dot11

{events | packets | forwarding | mgmt | network-map

| syslog | virtual-interface}

Table 85 - Syntax for debug dot11 Command

virtual interface

This example shows how to begin debugging of all radio-related events:

AP# debug dot11 events

This example shows how to begin debugging of radio packets:

AP# debug dot11 packets

This example shows how to begin debugging of the radio system log:

AP# debug dot11 syslog

This example shows how to stop debugging of all radio related events:

AP# no debug dot11 events

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

command to begin debugging of

Activates debugging of all radio related events

Activates debugging of radio packets received and transmitted

Activates debugging of radio forwarded packets

Activates debugging of radio access point management activity

Activates debugging of radio association management network map

Activates debugging of radio system log

Activates debugging of radio virtual interfaces

Debugging not enabled is the default of the command.