Chapter 2
Install the Stratix 5100 Wireless Access Point/Workgroup Bridge
Ports and Connections
Stratix 5100 WAP
Specifications
32
The ports and connections are on the bottom of the access point.
1
Item
Description
1
Security hasp
2
Power connection
3
Gigabit Ethernet port
4
Console port
5
Mounting bracket pins
This table lists the technical specifications for the Stratix 5100 Wireless Access
Point/Workgroup Bridge.
Table 1 - Stratix 5100 Wireless Access Point/Workgroup Bridge Specifications
Category
Dimensions (LxWxD)
Weight
Operating temperature
Storage temperature
Humidity
Power rating
Antennas
Compliance
Maximum power and channel
settings
Ethernet Cable Recommendation
While the Stratix 5100 WAP works well with the CAT-5e cable for 10/100 MB
installations, we recommend that you use CAT-6a cable for 1 GB installations.
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
2
3
4
Specification
22.04 x 22.04 x 4.67 cm (8.68 x 8.68 x 1.84 in.)
1.22 kg (2.7 lb)
-20...55 °C (-4...131 °F)
-30...85 °C (-22...185 °F)
10...90% noncondensing
Input: 100...240 50/60 Hz VAC
Output: 48V DC, 350 mA
External
Complies with UL 2043 for products installed in a building's environmental air
handling spaces, such as above suspended ceilings.
Maximum power and the channels allowed in your regulatory domain. See
Channels and Maximum Power Settings for Cisco Aironet Lightweight Access
Points. This document is available on Cisco.com.
32472-M
5