Vlan Configuration Example - Allen-Bradley Stratix 5100 User Manual

Chapter 15 Configuring VLANs

VLAN Configuration Example

450
This is configured as native Vlan for the
following interface(s) :
Dot11Radio0
FastEthernet0
Virtual-Dot11Radio0
Protocols Configured:
Bridging
Bridging
Bridging
Virtual LAN ID:
vLAN Trunk Interfaces:
FastEthernet0.2
Virtual-Dot11Radio0.2
Protocols Configured:
This example shows how to use VLANs to manage wireless devices on a college
campus. In this example, three levels of access are available through VLANs
configured on the wired network:
• Management access
Highest level of access; users can access all internal drives and files,
departmental databases, top-level financial information, and other
sensitive information. Management users are required to authenticate by
using Cisco LEAP.
• Faculty access
Medium level of access; users can access school's Intranet and Internet,
access internal files, access student databases, and view internal
information such as human resources, payroll, and other faculty-related
material. Faculty users are required to authenticate by using Cisco LEAP.
• Student access
Lowest level of access; users can access school's Intranet and the Internet,
obtain class schedules, view grades, make appointments, and perform other
student-related activities. Students are allowed to join the network by
using static WEP.
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Address: Received:
Bridge Group 1
Bridge Group 1
Bridge Group 1
2 (IEEE 802.1Q Encapsulation)
Dot11Radio0.2
Address: Received:
Transmitted:
201688 0
201688 0
201688 0
Transmitted: