Monitoring And Maintaining The Dhcp Server Access Point; Show Commands; Clear Commands; Debug Command - Allen-Bradley Stratix 5100 User Manual

Monitoring and Maintaining
the DHCP Server Access Point
You can use and
show clear
server access point

Show Commands

In Exec mode, enter the commands in this table to display information about the
wireless device as DHCP server.
Table 77 - Show Commands for DHCP Server
Command
show ip dhcp conflict
[ address ]
show ip dhcp database
[ url ]
show ip dhcp server
statistics

Clear Commands

In privileged Exec mode, use the commands in this table to clear DHCP server
variables.
Table 78 - Clear Commands for DHCP Server
Command
clear ip dhcp binding
{ address | * }
clear ip dhcp conflict
{ address | * }
clear ip dhcp server
statistics

Debug Command

To enable DHCP server debugging, use this command in privileged EXEC
mode:
debug ip dhcp server { events | packets | linkage }
Use the form of the command to disable debugging for the wireless device
no
DHCP server.
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Administering the WAP Access
commands to monitor and maintain the DHCP
Purpose
Provides a list of all address conflicts recorded by a specific
DHCP Server. Enter the wireless device IP address to show
conflicts recorded by the wireless device.
Provides recent activity on the DHCP database.
Use this command in privileged EXEC mode.
Provides count information about server statistics and
messages sent and received.
Purpose
Deletes an automatic address binding from the DHCP
database. Specifying the address argument clears the
automatic binding for a specific (client) IP address.
Specifying an asterisk (*) clears all automatic bindings.
Clears an address conflict from the DHCP database.
Specifying the address argument clears the conflict for a
specific IP address. Specifying an asterisk (*) clears conflicts
for all addresses.
Resets all DHCP Server counters to 0.
Chapter 6
227