Configuring Radio Settings - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

Configuring Radio Settings

This chapter describes how to configure radio settings for the wireless access

Enabling the Radio Interface

Universal Workgroup Bridge Mode

Radio Tracking

Configuring Radio Data Rates

Configuring MCS Rates

Configuring Radio Transmit Power

Configuring Radio Channel Settings

Configuring Location-based Services

Disabling and Enabling Short Radio Preambles

Configuring Transmit and Receive Antennas

Enabling and Disabling Gratuitous Probe Response

Disabling and Enabling Aironet Extensions

Configuring the Ethernet Encapsulation Transformation Method

Enabling and Disabling Reliable Multicast to Workgroup Bridges

Enabling and Disabling Public Secure Packet Forwarding

Configuring the Beacon Period and the DTIM

Configure RTS Threshold and Retries

Configuring the Maximum Data Retries

Configuring the Fragmentation Threshold

Enabling Short Slot Time for 802.11g Radios

Performing a Carrier Busy Test

Configuring ClientLink

Debugging Radio Functions

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014