Configuring The Access Point To Use Vendor-Specific; Radius Attributes - Allen-Bradley Stratix 5100 User Manual

Chapter 14 Configuring RADIUS and TACACS+ Servers
Configuring the Access Point
to Use Vendor-specific

RADIUS Attributes

424
The Internet Engineering Task Force (IETF) draft standard specifies a method
for communicating vendor-specific information between the access point and the
RADIUS server by using the vendor-specific attribute (attribute 26). Vendor-
specific attributes (VSAs) allow vendors to support their own extended attributes
not suitable for general use.
The Cisco RADIUS implementation supports one vendor-specific option by
using the format recommended in the specification. Cisco's vendor ID is 9, and
the supported option has vendor type 1, that is named cisco-avpair. The value is a
string with this format:
protocol : attribute sep value *
Protocol is a value of the Cisco protocol attribute for a particular type of
authorization. Attribute and value are an appropriate AV pair defined in the
Cisco TACACS+ specification, and sep is = for mandatory attributes and the
asterisk (*) for optional attributes. This lets a full set of features available for
TACACS+ authorization to also be used for RADIUS.
For example, the following AV pair activates Cisco's multiple named ip address
pools feature during IP authorization (during PPP's IPCP address assignment):
cisco-avpair= "ip:addr-pool=first"
The following example shows how to provide a user logging in from an access
point with immediate access to privileged EXEC commands:
cisco-avpair= "shell:priv-lvl=15"
Other vendors have their own unique vendor IDs, options, and associated VSAs.
For more information about vendor IDs and VSAs, refer to RFC 2138, "Remote
Authentication Dial-In User Service (RADIUS)."
Beginning in privileged EXEC mode, follow these steps to configure the access
point to recognize and use VSAs:
1. Enter global configuration mode.
configure terminal
2. Enable the access point to recognize and use VSAs as defined by RADIUS
IETF attribute 26.
• (Optional) Use the accounting keyword to limit the set of recognized
vendor-specific attributes to only accounting attributes.
• (Optional) Use the authentication keyword to limit the set of
recognized vendor-specific attributes to only authentication attributes.
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014