Obtaining Tftp Server Software - Allen-Bradley Stratix 5100 User Manual

Wireless access point/workgroup bridge

Hide thumbs Also See for Stratix 5100:

Table of Contents

extracting c350-k9w7-mx.122-13.JA1/html/level1/

images/apps_button_last_flat.gif (318 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/

images/apps_button_nth.gif (1177 bytes)

extracting c350-k9w7-mx.122-13.JA1/html/level1/

images/apps_leftnav_dkgreen.gif (869 bytes)

8. Enter the

that the wireless device uses when it restarts.

The wireless device creates a directory for the image that has the same

name as the image, and you must include the directory in the command.

Your entry can look like this example:

ap: set BOOT flash:/c350-k9w7-mx.122-13.JA1/c350-

k9w7-mx.122-13.JA1

9. Enter the

command to check your bootloader entries.

BOOT=flash:/c350-k9w7-mx.122-13.JA1/c350-k9w7-

mx.122-13.JA1

DEFAULT_ROUTER=192.168.133.1

IP_ADDR=192.168.133.160

NETMASK=255.255.255.0

10. Enter the

command to restart the wireless device.

When the wireless device restarts, it loads the new image.

Obtaining TFTP Server Software

You can download TFTP server software from several websites. We recommend

the shareware TFTP utility available at

Follow the instructions on the website for installing and using the utility.

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

If you don't press the spacebar to continue, the process eventually

times out and the wireless device stops inflating the image.

command to designate the new image as the image

http://tftpd32.jounin.net

Troubleshooting