Selecting The Csid Format; Configuring Settings For All Radius Servers - Allen-Bradley Stratix 5100 User Manual

Chapter 14 Configuring RADIUS and TACACS+ Servers

Selecting the CSID Format

422
6. Verify your entries.
show running-config
7. (Optional) Save your entries in the configuration file.
copy running-config startup-config
To disable accounting, use the
exec} {start-stop}
You can choose the format for MAC addresses in Called-Station-ID (CSID) and
Calling-Station-ID attributes in RADIUS packets. Use the
global configuration command to select the CSID format.
This table lists the format options with corresponding MAC address examples.
Option
default
ietf
unformatted
To return to the default CSID format, use the no form of the
command, or enter
csid
dot11 aaa csid default
You can also use the
TIP
CSID format.

Configuring Settings for All RADIUS Servers

Beginning in privileged EXEC mode, follow these steps to configure global
communication settings between the access point and all RADIUS servers:
1. Enter global configuration mode.
configure terminal
2. Specify the shared secret text string used between the access point and all
RADIUS servers.
TIP
radius-server key string
3. Specify the number of times the access point sends each RADIUS request
to the server before giving up. The default is 3; the range 1...1000.
radius-server retransmit retries
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
no aaa accounting {network |
method1... global configuration command.
MAC Address Example
0007.85b3.5f4a
00-07-85-b3-5f-4a
000785b35f4a
wlccp wds aaa csid
The key is a text string that must match the encryption key used on the
RADIUS server. Leading spaces are ignored, but spaces within and at
the end of the key are used. If you use spaces in your key, don't enclose
the key in quotation marks unless the quotation marks are part of the
key.
dot11 aaa csid
dot11 aaa
command to select the