CRANKCASE BRACKET
REMOVAL AND DISASSEMBLY
• Loosen the engine mounting nut 1.
• Also loosen the crankcase bracket nut 2 and rubber damper
bolt 3.
• Remove the brake-lock cable 4.
• Remove the engine mounting shaft and remove the crank-
case bracket nut 5 and rubber damper bolts 6.
• Remove the crankcase bracket 7, rubber dampers 8 and
spacers 9.
INSPECTION
• With the spacers 1 inserted in the bearings 2, Inspect that
the spacer turns smoothly without vertical and horizontal play.
• Replace the component if any abnormal condition is noted.
• Inspect the rubber damper and bushing for crack and damage
and replace if such a defect is noted.
CHASSIS
7-75